Window Production Machines

CNC Working Center for Window Frames ROTOWOOD


 
ROTOWOOD is the result of years of experience and innovation. It is an electronic working centre for the production of window frames which can produce, according to its composition, from 30 to 80 window frames a day, completely finished both in the tenoning and profiling side.
 
MANUAL LOADING OF THE PIECES ON THE PLIER
 
With this plier device you can work 2 pieces at the time; this ensures a productivity of about 4 pieces every minute. The plier, in the direction of the operator, ensures an easy loading of the pieces.
 
AUTOMATIC LOADING OF THE PIECES FROM THE TENONING TO THE PROFILING SIDE
 
As long as the pieces enter the profiling side, the tenoning side loads other 2 pieces, which are tenoned on both sides. This process ensures
quick workings, a higher production capacity and a reduction of the mistakes due to the automatic introduction of the pieces into the profiling side.
 
AUTOMATIC ROTATION OF 1 OR 2 PIECES
 
Automatic rotation of 1 or 2 pieces from 250 to 3200 mm, with automatic introduction of the pieces in the profiling side.
  • MILLING WORKING "ARIA 4"
  • HANDLE HOLE WITH ONLY ONE PASSAGE
  • PLUG HOLES FOR TRANSOMS AND JAMBS

OBLIQUE TENONING OPERATIONS
 
With the working centre Rotowood you can realize +/-60° tilted tenons, just recalling the pre set-up program.
 
SQUARING OPERATIONS ON THE TENONING SIDE
 
Squaring of top part of sashes in tenoning side with automatic introduction of the pieces into the profiling side. Enlarged fibroid table to support doors and windows of big dimensions.
  
TENONING CARRIAGE
Sliding of the tenoning carriage on linear guides with rack drive. A brushless motor ensures a right interpolation to do workings on the pantograph.
 
LEFT SPINDLE WITH COUNTERGUIDE
 
With one or more left spindles you can obtain pieces already profiled on both sides, ready to be assembled.
 

CHARGING AND DISCHARGING TABLE
  
Table for the automatic unload of the pieces so that the operator can assemble them.
 
TOOL CHANGE PANTOGRAPH
 
Tool stock of 12 stations to lodge drill bits and aggregates with angular trows for drilling and milling. Possible operations:

  • Glass stop beam cutting +/- 45°
  • Keyholes cylinders drilling
  • Seats, hing double opening sash drilling
  • Pins on transom and upright in three sides drillings
      

AUTOMATIC INTEGRATED TOOL CHANGE SYSTEM

  • Unlimited assisted number of workings
  • Remarkable reduction of mean times to equipe tools
  • Tools servicing interventions possible during working of the machine
  • Automatic change of counterwood


 
TELE ASSISTANCE
 
At the base of its working system there are simplicity and functionality, combined to high-productivity, in reduced working space. You can also rely on a Tele-assistance service, which allows the operator to run the machine and to transmit the data through a on-line RS232 connection.
 
TECHNICAL DATA
 
Circular saw unit

Motor power  3 kW
Rpm saw motor  3000 g/min
Ø Saw blade  400 mm
Cutting height  125 mm
 
Tenoning spindle
Ø Spindle
 50 mm
Spindle lenght  620 mm     
Motor power  9,25 kW
Rpm shaft motor  3200
Max. tool Ø
 350 mm
 
Profilig spindles
Ø Spindle    
 50 mm
Spindle lenght   320 mm     
Motor power   7,5 kW
Rpm shaft motor    6000
Max. tool Ø
 240 mm
Tool base Ø
 110-140 mm
 
Glass stop recovery unit
Quantity
 1
Ø Saw
 200 mm     
Motor power     2,20 kW
Rpm shaft motor   6000
    
SIZE
 


  

A
B
C
D
ROTOWOOD 60
3200 mm 2270 mm 2600 mm 2200 mm
ROTOWOOD 80
4130 mm 3760 mm 2600 mm 2200 mm
ROTOWOOD 90
4130 mm 3760 mm 2600 mm 2200 mm
ROTOWOOD 100
5450 mm 5100 mm 2600 mm 2200 mm
  

   
Brochure   Videos

Gallery

ROTOWOOD
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copyright © Saomad 2 srl  | Via Frattina, 58 - 35011 Campodarsego (PD) Italy | Reg. Imprese di Padova N. / C.F. / P.I. 02433840283 | Cap. soc. euro 100.000,00 i.v.