Window Production Machines

CNC Working Center for Window Frames ROTOWOOD EVO


 
Rotowood Evo is an electronic working centre for window and door production. Its standard configuration is suitable for every type of tenoning and profiling working. Through a CNC unit and an automatic tool change system this machine can perform drilling and milling workings on the 6 sides of the piece for every type of door and window frames.
 
TENONING SIDE
 
  • Circular saw diameter 400 mm
  • Tenoning spindle 50 x 320 mm with quick coupling HSK100 for manual manual or automatic tool change. Antichip device with manual or automatic change
  • The clamp allows to work 2 pieces at a time (min-max length 250-2800 mm), with automatic introduction of the piece in the profiling side
  • The axis interpolation system allows to realize tilted tenons from 0 to +/-60

 
PROFILING SIDE

  • Profiling side with 3 spindles 50x320 mm, radius unit and glass stop recovery unit. Feeding unit with cardanic system and tiltable wheels. Motorized counterguide
  • Automatic introduction of 1 or 2 pieces in the profiling side
  • Calibrating: first spindle with double rotation ways for antichip timing operating during calibrating
   
CNC UNIT FOR DRILLING AND MILLING
 
ROTOWOOD EVO with CNC unit (with 
automatic 12 positions tools change) is able to perform every type of drilling and milling workings on the 6 sides of the piece: glass stop beam cutting 45°, keyholes cylinders drilling, seats, hinge double opening sash drillings, handle drilling, pins on transom and upright in three sides drillings.
  
CNC UNIT WORKINGS
 
Those are some hardware patterns which can be inserted in the machine thanks to the working cycles or macros of the CNC unit already installed in the program. Programs generated from other software can be easily transmitted by Ethernet and USB devices.
  
AUTOMATIC TOOLS CHANGE
 
Possibility to have 1 tenoning spindle and 1, 2 or 3 profiling spindles with HSK B100 quick coupling system. The tool change is done through an automatic overhead tackle lifting system. Tool stock of 5 positions for tenoning spindles (and antichip devices) and 8 positions for profiling spindles.
 
OTHER OPTIONS
 
  • Additional 620 mm tenoning spindle
  • Bigger table for sashes heads squaring
  • Left profiling spindle
  • Bottom horizontal spindle
  • Lowering glass stop beam with hardware unit spindle 40x170 mm
  • Motorized slide for pieces return back to the operator
  • Automatic loading table

  
TECHNICAL DATA
 
ROTOWOOD EVO

Mini-Max working lenght  250-2800 mm
Mini-Max working width    35-20 mm
Mini-Max working height  30-120 mm
Automatic inclination  +/- 60°
 
Circular saw unit

 
Ø Saw blade 
 400 mm  
Cutting height               120 mm        
Pneum. saw adjustment    
 
Tenoning spindle
 
Ø Spindle    
 50 mm
Spindle lenght   320 mm      
Elecctronic vertical set
 
Profilig spindles
 
Ø Spindel
 50 mm
Spindle lenght 
 320 mm      
Elecctronic vertical set

 
Glass stop recovery unit
 
Ø Spindle                   
 30 mm
Ø Saw  
 200 mm      
 
Profilig spindles
 
Ø Spindel                   
 30 mm
Max tool Ø
 180 mm      
  

OPTIONALS
 
Pantograph

Change tools 12 stations
Electrospindle with HSK quick coupling                                       
Motor power                           8 kW    
Rotation speed  900-18000 rpm
  
Hardware grooving unit
 
Ø Spindel
 40 mm
Spindle lenght            
 170 mm      
2 vertical positions

 
Technical data herewith can be subject to modification without notice. Please check with manufacturer for proper machine configuration.
 
SIZE
 



   
Brochure   Videos 

Gallery

ROTOWOOD EVO
 
  

 

 

 

 

 

 


Copyright © Saomad 2 srl  | Via Frattina, 58 - 35011 Campodarsego (PD) Italy | Reg. Imprese di Padova N. / C.F. / P.I. 02433840283 | Cap. soc. euro 100.000,00 i.v.