Window Production Machines

Profiling Machines PS3A


 
In the range of SAOMAD machines for the window making there are the sash-profiling machines mod. PS 2 - 3 - 4 - 5 A with base structure made of structural steel to give a high degree of stability. The easy programming makes the use of this machine simple and flexible. The basic machine PS A is equipped with 2 shafts; the first turns a clockwise and the second anti-clockwise direction performing the anti-chip work. 
The machine can also be fitted with glass retaining strip unit and lock slotting unit. Thanks to a microprocessor programmer each machine operation (start, stop, shaft adjustment, ecc) are programmer-assisted. We planned this machine to allow each adjustments happen on friction bearing sliding on tempered steel lubricated by oil reservoir. Long life and no maintenance needed. Possibility to add at a later stage a tenoning machine and obtain a work centre for window frames.
 

TECHNICAL DATA
   

Shafts number  2
Ø shaft
 50 mm
Shaft lenght  320 mm
Speed  6000 rpm
Motor power
 7,5 HP
Max. tool Ø
 240 mm
Tool rod Ø
 110-140 mm

 
Feed/Motor power HP1 (KW. O.75)
 

Continuous rolls

Speed regulation                                                              2,5-15 m/min
Ø rolls
 120 mm                                                               
Rolls axle distance  130 mm
Pneumatic rolls pressure  
Regulation   11-40 kg/cm2

 
Overall dimensions
 

Lenght                                                
 3124 mm
Width
 1260 mm                                    
Net weight  2300 kg ca.

   
ON REQUEST

  • Glass bead recovery unit
  • Wooden piece return roller
  • Uprated motor power HP 10- HP 12.5
  • Suction hoods automatic opening
  • Hardware grooving unit
  • Ø shaft mm 40x240

   
Brochure    

Copyright © Saomad 2 srl  | Via Frattina, 58 - 35011 Campodarsego (PD) Italy | Reg. Imprese di Padova N. / C.F. / P.I. 02433840283 | Cap. soc. euro 100.000,00 i.v.